Krimlin's remotovational build (actually making progress now) - Page 5

njg86420 · 12-20-2009, 01:21 PM

P.s. if your bold do both of them flush mount out the passenger side. This is perfect when some fool has thier window down on that side. You can give them a straight earshot full of that v8 power. I used to have people damn near swerve off the road when i would down shift next to a driver with an open window. Just a thought!

LMsports-Mark · 12-20-2009, 06:29 PM

When and where are you actually doing the swap?
If I'm in town I'd like to come help.

dekansnowman · 12-20-2009, 06:43 PM

Pipes running like an AC Bristol Cobra

steve-0 · 12-20-2009, 06:53 PM

do nascar pipes

Krimlin · 12-21-2009, 11:24 PM

Quote:

Originally Posted by LMsports-Mark

When and where are you actually doing the swap?
If I'm in town I'd like to come help.

paying secret services to do the swap

Slip&Slide · 12-22-2009, 12:05 AM

How much are they charging you?

Quote:

Originally Posted by Krimlin

paying secret services to do the swap

dekansnowman · 12-22-2009, 12:09 AM

You should PM them for a quote.

LMsports-Mark · 12-22-2009, 12:49 AM

Quote:

Originally Posted by Krimlin

paying secret services to do the swap

Dude... You just took a -20 hit to your 240SX cred stat.
Would you like to make a saving roll?

angrycarrot · 12-22-2009, 01:32 AM

Quote:

Originally Posted by LMsports-Mark

Dude... You just took a -20 hit to your 240SX cred stat.
Would you like to make a saving roll?

says the old man subi owner on a 240 website....

LMsports-Mark · 12-22-2009, 04:04 AM

Quote:

Originally Posted by angrycarrot

says the old man subi owner on a 240 website....

I still have a 240SX in my garage.
I just have no money to get her running.

s!lv!a · 12-22-2009, 05:07 PM

How is it gonna be weight wise? What's the comparison vh-ka? Hopefully it's not like the people who shove a prelude motor into a crx.. That car will only drive in a straight line... Lol

I'm interested to see all this glory.. And hear a vh with headers and exhaust and whatnot.. Lol, it's gotta be beasty as Fuck dude.. And I say either dual exhaust to each side with a slash cut tip and an h-pipe/x-pipe or just go dual in, single out and have it like 3-3.5" from the muffler back

SnafuPossum · 12-22-2009, 05:19 PM

i say just dump the exhaust right before (only if your moving the gas tank) the rear axle, would sound hella sexy

jackasspyro2 · 12-22-2009, 05:45 PM

whoo whoo!

angrycarrot · 12-22-2009, 05:50 PM

Quote:

Originally Posted by jackasspyro2

whoo whoo!

WTF those idiots almost hit two parked cars, ran a stop sign and almost took out another person in the process of running the stop sign but in other news that also brought this smiley to life -

Krimlin · 12-22-2009, 06:32 PM

Quote:

Originally Posted by LMsports-Mark

Dude... You just took a -20 hit to your 240SX cred stat.
Would you like to make a saving roll?

School (Monday-Friday) Work (Night shift 12 hrs)

^That's the first problem...

I have no fab skills...

^That's the second problem...

And SSA is very good at what they do, and I want the swap done right...

12-22-2009, 08:31 PM

i hate to break it to you, but VH's aren't that loud. run regular pipes, sidepipes on a quiet v8 that isn't that powerful for a v8 will be kinda...lame.

small displacment luxury car v8's + sidepipes don't mix really well. if you really wanna help it sound redneck, put some glasspacks on it. but don't do side exhausts, not with that v8. your bark will be a lot quieter and odder than your bite.

BOXCAR · 12-22-2009, 08:50 PM

Hey krim, just run into a y-pipe and out the stock location with a twin tip.

slideways2004 · 12-22-2009, 08:52 PM

Quote:

Originally Posted by BOXCAR

Hey krim, just run into a y-pipe and out the stock location with a twin tip.

agree. this gives you the best sound also.

Krimlin · 12-22-2009, 08:57 PM

To be honest I was just gonna go y pipe to a 3" single out my HKS can that's on there

Krimlin · 12-22-2009, 09:04 PM

This swap is SOOO close I can taste it!!!

LMsports-Mark · 12-23-2009, 03:14 PM

Quote:

Originally Posted by Krimlin

To be honest I was just gonna go y pipe to a 3" single out my HKS can that's on there

Pretty sure a single 3" pipe out will be way too restrictive.
Your going to be choking your power.

Here is how it should be done:

LMsports-Mark · 12-23-2009, 03:58 PM

Quote:

Originally Posted by mikespeed95

i hate to break it to you, but VH's aren't that loud. run regular pipes, sidepipes on a quiet v8 that isn't that powerful for a v8 will be kinda...lame.

small displacment luxury car v8's + sidepipes don't mix really well. if you really wanna help it sound redneck, put some glasspacks on it. but don't do side exhausts, not with that v8. your bark will be a lot quieter and odder than your bite.

Yea... Not loud at all...
Can you sense my sarcasm?

LMsports-Mark · 12-23-2009, 04:04 PM

Quote:

Originally Posted by Krimlin

School (Monday-Friday) Work (Night shift 12 hrs)

^That's the first problem...

I have no fab skills...

^That's the second problem...

And SSA is very good at what they do, and I want the swap done right...

1. That schedule still leaves Sat & Sun for swap work.
2. The only thing that really needs fabricated for this swap is the exhaust. Everything else has been done for you by Mazworx.

markfluko · 12-23-2009, 04:30 PM

That car you posted the video for is the build I posted on the first page of this thread. That is not a stock VH, it has cams and many other things done to the engine.

LMsports-Mark · 12-23-2009, 04:34 PM

I've been following gsracer's build from the beginning.

Mikespeed didn't limit his statement to STOCK VH45s.
"i hate to break it to you, but VH's aren't that loud."

These dyno runs were done with the VH45 in stock form with only headers and exhaust.

12-20-2009, 01:21 PM	#101
njg86420 Registered User Join Date: Mar 2009 Location: stafford, tx Posts: 92	P.s. if your bold do both of them flush mount out the passenger side. This is perfect when some fool has thier window down on that side. You can give them a straight earshot full of that v8 power. I used to have people damn near swerve off the road when i would down shift next to a driver with an open window. Just a thought! __________________ "THE REAL NICK G"

12-20-2009, 06:53 PM	#104
steve-0 slow Join Date: Aug 2008 Location: arlington Posts: 4,948	do nascar pipes __________________

12-22-2009, 05:07 PM	#111
s!lv!a Moderator Join Date: Sep 2007 Location: Richwood Posts: 4,103	How is it gonna be weight wise? What's the comparison vh-ka? Hopefully it's not like the people who shove a prelude motor into a crx.. That car will only drive in a straight line... Lol I'm interested to see all this glory.. And hear a vh with headers and exhaust and whatnot.. Lol, it's gotta be beasty as Fuck dude.. And I say either dual exhaust to each side with a slash cut tip and an h-pipe/x-pipe or just go dual in, single out and have it like 3-3.5" from the muffler back __________________ NAZI MOD '07 Z33 SMB '95 S14 SE / Kouki

12-22-2009, 08:50 PM	#117
BOXCAR FREE DUMB Join Date: Sep 2007 Location: Richmond Posts: 1,794	Hey krim, just run into a y-pipe and out the stock location with a twin tip. __________________ http://essencegarage.wordpress.com

12-22-2009, 08:57 PM	#119
Krimlin Adminimod Join Date: Mar 2006 Location: Toyota 86 Land Posts: 5,955	To be honest I was just gonna go y pipe to a 3" single out my HKS can that's on there __________________ Fucking Classy Rest in Peace to our fallen brothers: Sky Zero ADiamond

12-22-2009, 05:45 PM	#113
jackasspyro2 I fuck cats Join Date: Jan 1970 Location: Space Posts: 1	whoo whoo!

12-22-2009, 08:31 PM	#116
Mikespeed95 Guest Posts: n/a	i hate to break it to you, but VH's aren't that loud. run regular pipes, sidepipes on a quiet v8 that isn't that powerful for a v8 will be kinda...lame. small displacment luxury car v8's + sidepipes don't mix really well. if you really wanna help it sound redneck, put some glasspacks on it. but don't do side exhausts, not with that v8. your bark will be a lot quieter and odder than your bite.

12-22-2009, 09:04 PM	#120
Krimlin Adminimod Join Date: Mar 2006 Location: Toyota 86 Land Posts: 5,955	This swap is SOOO close I can taste it!!! __________________ Fucking Classy Rest in Peace to our fallen brothers: Sky Zero ADiamond

12-23-2009, 04:30 PM	#124
markfluko Registered User Join Date: Feb 2006 Location: CS Posts: 688	That car you posted the video for is the build I posted on the first page of this thread. That is not a stock VH, it has cams and many other things done to the engine.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode